3M 9885 Thermally Conductive Tape, 3/4 in x 36 yd 5.0 mil, 12 per case Bulk

Create New Account

Forgot Password?

Shop by
category

Product search

Shop by
manufacturer

3M
Vibac
Tach-it
Shurtape

Other manufacturers...

3M™ Specialty Tape and Adhesive

3M 9885 Thermally Conductive Tape, 3/4 in x 36 yd 5.0 mil, 12 per case Bulk
SKU: 00021200396250

3M(TM) Thermally Conductive Tape 9885, 3/4 in x 36 yd 5.0 mil, 12 per case Bulk

5.0 mil, thermally conductive adhesive transfer tape on 2.0 mil, polyester liner. For mounting thermoelectric cooling modules, bonding flexible circuits to heat sinks, bonding heat sinks to microprocessors and bonding TAB-mounted IC to PCB.

These tapes allow for easy joining of many substrates with light pressure in just seconds at room temperature. 3M(TM) Thermally Conductive Adhesive Transfer Tapes are permanently tacky tapes consisting of a 2.0 mil, 5.0 mil, or 10.0 mil thick pressure sensitive adhesive (PSA) film filled with ceramic particles. These particles allow thermal conduction through the tape. The tape yields an excellent combination of thermal conductivity, electrical isolation and adhesion. The transfer tape format means there is no carrier layer, which allows for superior gap filling between the bonded substrates. This improved contact results in higher bond strength and lower thermal resistance. The PSA properties of these tapes make them easy to handle and apply without need for thermal bonding. These tapes are also repositionable and reworkable during assembly, and the final bond is permanent, eliminating the need for clamps and screws. All three thicknesses meet NASA low outgassing specifications (NASA SP-R-0022).

28%