3M 747D Flap Wheel Type 84, 3 in x 1 in x 1/4-20 EXT 80 X-weight, 10 per case
SKU: 00051144832675-
Why Buy From Us
We go the extra mile for you - literally
- Customer Reviews
-
3M Strategic Distributor
3M Stock #: 7010363130 UPC#: 0-00-51144-83267-5 3M ID: 60440262271 Product Number: 747D
Benefits
X-weight cotton backing withstands aggressive sanding and grinding
Resin bonding resists thermal and chemical deterioration for extended wheel life
Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
Includes a grind-aid to provide cooler running on stainless-steel and other metals
Description
Our 3Mâ„¢ Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.
Extended Description
Mixed Ceramic Abrasive Each flap on the 3Mâ„¢ Flap Wheel 747D is covered with a ceramic abrasive mix, which was designed using a proprietary process to enhance toughness and hardness of the grain. For increased performance, this mix features aluminum oxide blended with 3M ceramic grain to create a harder, longer-lasting abrasive. Perfect for light to moderate stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes it an excellent choice for moderate stock removal and surface preparation. High Quality Construction The abrasive mix is attached to a flexible cotton backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration, which can occur during high speed sanding. This bond is very hard which allows for faster cuts and a higher cut rate. This wheel also includes a grinding aid for cooler running on stainless steel. Each flap uses an X-weight cotton backing, which provides a tough, but flexible surface that bends to fit any work piece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, assuring that surfaces are sanded consistently throughout the life of the wheel. Flap Wheel Advantages Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals. The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. 3Mâ„¢ flap wheels are available in both flange mounted and spindle mounted constructions with general purpose aluminum oxide or high performing 3M ceramic aluminum oxide blend abrasive grain.
Specifications
Number 3m Part Number | 747D |
Application Category | Blending/Deburring;Dimensioning/Descaling |
Applications | Blending;Descaling;Refining;Setting the Grain |
Attachment Type | Threaded |
Backing Material | Cloth |
Backing Weight | X Weight |
Brand | 3Mâ„¢ |
Catalog Market | Manufacturing |
Color | Orange |
Converted Form | Flap Wheel |
Diameter | 3 |
Diameter Metric | 76.2 |
Diameter Metric Unit | mm |
Diameter Unit | Inch |
Dimension 1 Text | 3 |
Dimension 1 Unit Of Measure | IN |
Dimension 2 Text | 1 |
Dimension 2 Unit Of Measure | IN |
Dimension 3 Text | 1/4 |
Dimension 3 Unit Of Measure | IN |
Document Safety Inserts | http://images.salsify.com/image/upload/s--IDaZ-xc0--/h3fxnlce7hc89sgcmbhq.pdf |
Equipment Machines | Backstand;Die Grinders;Inline Sanders |
Form Type | Flap |
Grade | 80 |
Hierarchy Product Group Image | http://images.salsify.com/image/upload/s--AIpN_lXC--/uhpdsbcingmixyhfblx4.tiff |
Html Content | <div class="MMM--gapBottom" style="overflow:hidden;"> <div style="float:right; margin:0 0 10px 10px; text-align:center;"> <img style="width:200px; height:200px;" src="http://multimedia.3m.com/mws/media/524108P/3m-die-grinder-model-number-20237-with-3mtm-pg-wheel-747d.jpg" alt="3M™ Flap Wheel 747D" /> </div> <strong class="MMM--txt_bold">Mixed Ceramic Abrasive</strong> <br /> Each flap on the 3M™ Flap Wheel 747D is covered with a ceramic abrasive mix, which was designed using a proprietary process to enhance toughness and hardness of the grain. For increased performance, this mix features aluminum oxide blended with 3M ceramic grain to create a harder, longer-lasting abrasive. Perfect for light to moderate stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes it an excellent choice for moderate stock removal and surface preparation. <br /> <br /> <strong class="MMM--txt_bold">High Quality Construction</strong> <br /> The abrasive mix is attached to a flexible cotton backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration, which can occur during high speed sanding. This bond is very hard which allows for faster cuts and a higher cut rate. This wheel also includes a grinding aid for cooler running on stainless steel. Each flap uses an X-weight cotton backing, which provides a tough, but flexible surface that bends to fit any work piece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, assuring that surfaces are sanded consistently throughout the life of the wheel. <br /> <br /> <div style="float:left; margin:0 10px 10px 0; text-align:center;"> <img style="width:200px; height:134px;" src="http://multimedia.3m.com/mws/media/593749P/3mtm-flap-wheels-747d-grade-80-x-wt.jpg" alt="Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals." /> </div> <strong class="MMM--txt_bold">Flap Wheel Advantages</strong> <br /> Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals. The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. 3M™ flap wheels are available in both flange mounted and spindle mounted constructions with general purpose aluminum oxide or high performing 3M ceramic aluminum oxide blend abrasive grain. </div> |
Industries | Metalworking |
Keywords 1 | PG Wheel, Flap Wheel |
Mineral Type | Ceramic |
Model Number | 747D |
Position | Best |
Primary Application | Metalworking |
Product Form | Wheel |
Short Description | 3Mâ„¢ Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish. |
Size Description | 3 in DIA X 1 in WD X 1/4-20 EXT |
Sub Industries | Metal Fabrication |
Substrate Category | Metal |
Substrates | Stainless Steel |
Thread Size | 1/4-20 EXT |
Trademark 1 Without Suffix | 3M |
Wheel Type | Type 84 |
Width | 1 |
Width Metric | 25.4 |
Width Metric Unit | mm |
Width Unit | Inch |
- Extra fields
-
PricingCase (10 Each)
-
Minimum Order1
-
3M Product ID747D
-
3M Stock #7010363130
-
3M ID60440262271
-
Size3 in DIA X 1 in WD X 1/4-20 EXT
-
InventoryIn Stock
-
3M Shipping UPC50051144832670
-
3M Billing UPC00051144832675
-
- Manufacturers
-
Manufacturer3M
-
Pack-n-Tape's founder and President, Art Cerimele, has been supplying customers with packaging products since 1990.
Over the years he's learned what it takes to satisfy a customer.
Which, sometimes means going the extra mile - literally.
In the early 1990's, on a hot summer day in Columbus, OH, Art, then an employee of a local packaging supply company, received a call from a customer who had run out of packaging peanuts and therefore, were unable to ship any orders. With stock located over 100 miles away, his customer was facing a shut down situation. Art recognized the impact this could have on his customer and went to work exploring any and all options. Stock could be delivered the next day, but that wasn't good enough. Art decide to purchase some product from a local competitor and strapped it onto the top of his car. He recalls driving about 25 mph on back roads to his customers location. Needless to say his customer was extremely happy and was shipping packages with almost no down-time. | Art (on right) going the extra mile for his customer. |
Art has instilled these same values in everyone here at Pack-n-Tape and our everyday activities.
You can rest assured our experts will work to understand your business’s priorities and processes to ensure you get the products you need, when you need them.
What This Means to You
Access
As a 3M Strategic Distributor, we receive notice of the newest 3M products -- often before the rest of the market -- and enjoy special promotions and unique offers. With extra lead time and direct access to the latest and greatest in 3M products and pricing, we are poised to help you keep your business on the cutting edge.
Understanding
We have dedicated 3M Strategic Account Specialists on our team, ready to provide personalized solutions for even your toughest applications. Our Specialists receive specialized product training at 3M headquarters and work closely with 3M’s local product specialists. Our entire sales staff has access to online and field-based training as well as enhanced product information. These resources give us an understanding of 3M product solutions you won’t find anywhere else.
Our onsite expert works to understand your business’s priorities and processes, so you get the solutions you need, when you need them.
Confidence
In order to partner with 3M as a Strategic Distributor, Pack-n-Tape has demonstrated our company’s strength and our commitment to providing ongoing support to our customers. We are dedicated to bringing you value for the long haul.
Shipping
We ship within the lower 48 states. When product is available, ground orders typically ship after a 3 business day warehouse processing time. Air orders typically ship same day if orders are entered by 11:00am Mountain Standard Time. If you are shipping to a new address, please allow 1 day extra for ship-to account setup. These are estimates and could change if special circumstances prevail.
Shipping Errors
Customer must notify us within 14 days of receiving product if there is a shipping error.
Incorrect Address
Be sure to pay close attention to your shipping address information on the checkout page. The customer is responsible for providing correct shipping address information. If an order is shipped to an incorrect address provided by the customer, the customer takes full responsibility to retrieve the package or will be responsible for the full cost of the items shipped.
Pricing
All products on this site are sold for profit. If errors are found in our items/case or pricing, Pack-n-Tape reserves the right to honor the price or correct the error.
Please see our full return policy by reviewing our terms and conditions.
Return Guidelines
Returns require a Return Merchandise Authorization (RMA) number. Returns cannot be processed without an RMA number.
Made to order items are typically NOT returnable.
A minimum restocking fee of 25% or more, depending on the item, manufacturer policies, and circumstances. If any of the product has been used and not in resalable as new condition, we cannot issue you a refund.
NOTE: If a customer ships product outside the USA all warranties are void and no returns are accepted regardless of circumstances.
Shipping Errors
Customer must notify us within 14 days of receiving tracking information or the product itself if there is a shipping error.
Defective Merchandise
Customer must notify us within 14 days of receiving product if there is a defect. If a product is suspect of being defective, only a portion of the suspected product may be returned until the factory completes required testing to determine if the product is within specification. Pack-n-Tape will pay for the shipping charges but it is the responsibility of the client to package the product in a suitable fashion. If the product is found to be defective then arrangements will be made to return the product. After the product is checked in and inspected a credit will be issued to the card used to purchase it.
Cancellation Policy
Once a customer completes the checkout procedure and the order is processed it can't be cancelled. At this point the customer must follow our return policy.
If a customer refuses shipment of an order placed online, no returns will be accepted. If the customer changes their mind about an order they must go through the return policy.
Incorrect Address
Be sure to pay close attention to your shipping address information on the shopping cart page and reviewing details of the order confirmation when phoning/emailing orders processed by Pack-n-Tape representative. If an order is shipped to an incorrect address provided by the customer, the customer takes full responsibility to retrieve the package or will be responsible for the full cost of the items shipped.
Pricing
All products on this site are sold for profit. If errors are found in our items/case or pricing, Pack-n-Tape reserves the right to honor the price or correct the error.